2.19.2013

DIY Salvage Entry Table

In our home, we have a long entry wall. One so long that it dwarfed most entry tables. I found this one on Pottery Barn that I loved, but I would have to be crazy to pay that much for it. The main reason I browse most furniture catalogs is to merely get inspiration, and this table was the inspiration for the table I was to make.

One Saturday, we ventured to downtown Fort Worth to see if the architectural salvage warehouse, Discount Home Warehouse, had some balusters. I found some nice bulky ones and got four. They sat in my garage for a long time until I finally figured out what I wanted the top to look like, and how to make it. 

I made a little digital rendition of how I was going to attach the legs to the table. Since these weren't made to be table legs, they have a round top instead a a squared out one. So I adapted and it worked out great. I was going to have aprons that completely surrounded the table with the legs set behind the aprons. I mitered the corners and screwed them to the table top from the bottom side of each apron board with long wood screws. 


I used 1x6 whitewood boards to make the top. I pieced three boards together, wood gluing the first two, and then glued the third on. I then used a few metal brackets (called mending plates) and short wood screws on the underside to secure the three boards together even more. 

I had to sand down each leg to get rid of their glossy poly finish. Each leg had holes and notches from where they were attached- I decided to leave the holes to add character and remember that they were salvaged not store bought. Then, I painted primed them, let dry, then painted them. 

After the table top's glue dried, I cut and mitered the aprons and attached them to the table top. Then, following what I did in my digital sketch above, I cut some corner braces and screwed them into the aprons and then into each leg twice.  Once it was all together, I painted the top and aprons. I did a few coats and when they were thoroughly dry, I distressed the edges of everything. I let it all cure and then moved it inside.

Here's where it sits today:

I think it's fitting that a salvaged window from SMU hangs above it- salvaged friends. The table fits the space great and I have fun re-decorating it as each holiday comes along.

1 comment:

  1. That's amazing, Kinzie. I absolutely love it and I love your ingenuity.

    ReplyDelete