4.03.2013

Easy Minky Baby Blanket

I posted about a minky baby blanket that I made for a friend's baby, and here is the quick tutorial to go with it. These blankets are fairly easy to make, and can be completed in less than an hour. They are super cuddly and so cute.

Materials needed:
1 yard minky
1 yard cotton, satin, or flannel fabric
1-2 packages satin binding (at least 4 yards length total)
coordinating thread

Instructions:
1. Lay out your front side fabric and make sure that the edges are straight and square. Round out the corners by tracing around the edge of a plate or can with a pencil and trimming off excess (I didn't do this then, but did it later. Either way works.

2. Baste satin binding trim around the front side fabric using a 3/8" seam allowance, onto the right side of the fabric. Overlap edges of binding where they join.

3. Lay out your minky, right side up, smoothing out any wrinkles. Place front side fabric on top of minky, right side down. Trim off excess minky (or trim after sewing like I did, because I was too lazy...) and pin through all layers.

4. Using a 1/2" seam allowance, sew through all layers, making sure to leave an opening.

Here's the seam opening:

I left about 4 inches open.

5. If you haven't already done so, trim off excess minky now, clip corners but don't snip through the seam.

6. Now flip the blanket right side out through your opening.


7. Now you can hand sew up the opening (which is what I did) or top stitch around the entire blanket, catching the opening in your top stitch seam.

Done!


4 comments:

Suzanne said...

I've never finished a baby blanket off with the satin binding quite like this. It's a fabulous idea!

Sheryl50 said...

Making one this week!! I like the way you did the binding, so simple!! Thanks!

Sheryl50 said...

I am going to make one this week!! Love the way you did the binding! Thanks!

Unknown said...

Awesome short cut, and I need all I can get. :) Thank You so very much, never seen done like this.
Thanks for sharing !

Amazon Affiliate